Soft Roman Shade | Buy Custom Relaxed Roman Shades & Blinds

If some of your favorite things are bunnies, the Soft Roman Shade may just be for you. It is the softest, hence the name, of all the Roman Shades. When you touch a Soft Roman Shade, you can’t help but feel warm and fuzzy. The unique flow of fabric is created by hobbling the face fabric onto the lining at regular intervals until it cascades like waves in calm water. Soft Roman Shades also lend themselves to use with all kinds of fabrics from full-bodied ones to lightweight ones. So go ahead and be picky...

Features:

All Roman Shades wider than 48” has to have a union made.

Top Down Bottom Up Option

Select the fabric that matches your home decoration with our over 140 fabric styles. You can also check our fabric combination section to get ideas and selects our 10 free samples.

Your mounting options are:

•Inside Mount. Factory takes 3/8” deduction. Shades screw into the top of the window opening. There are no brackets included.

•Outside Mount. Factory takes no deductions from you measurements. Shades mount to the window or wall with 1” L-brackets. There are no other bracket options.

Choose cord position: Left or Right / Front or Back – there is an additional change for Cords Front.

Lining: All roman shades include the standard lining in white or ivory. For an additional charge you may upgrade your lining to Thermal Sateen, Blackout or Premium Blackout.

Seamless Roman Shades are available up to a maximum of 48" wide. Beyond 48" wide, shades will be made with a varying width center panel and side panels seamed to a minimum of 9" wide on both sides. Patterns and Jacquards will always be aligned and matched.

All Roman Shades wider than 48" has to have a union made.

Other Roman Shades - Flat Roman Shades, Classic Roman Shades & Soft Roman Shades, &Custom Shades

Be advised: This shade takes manual adjusting to achieve the desired effect. It is not recommended for frequent use, but more as a decorative shade.

The sides of the shade curve upward when the shade is raised. This softens the entire look of the shade as the fabric gathers in random soft folds.

Small tack stitches used to attach the cord rings are visible on the face of the shade. When first installed this style should be pulled up fully and left in place several days to create pleat memory”.